CameraOne Release Notes – Ibis ( 2.14.x.x )

Latest ATEM suite / firmware tested : 10.4.1 / 10.3

Changes since 2.14.1.9

FIX – Proxy setting is ignored when retrieving license – #22338

FIX – Retrieving recordings from the ATEM disc can sometimes fail until a power restart – #22532

Latest ATEM suite / firmware tested : 10.3 / 10.3

Changes since 2.14.1.5

NEW – Switcher configuration is now clarified by offering four clearly described options – #22167 #22023 #22024

FIX – Using input as mute fails if no default camera is set – #22076

FIX – Mute button not visible when mute is configured as an input – #22143

FIX – AutoMute fails to unmute following a restart when mute is configured as an input – #22164

FIX – AutoSwitch is no longer disabled when mute is enabled – #22174

FIX – Live preview not appearing after restart – #22181

FIX – Mute status not retained following restart – #22182

Latest ATEM suite / firmware tested : 10.3 / 10.3

Changes since 2.14.1.4

FIX – Live stream trigger not working from MIDI

Latest ATEM suite / firmware tested : 10.3 / 10.3

Changes since 2.14.0.36

FIX – Improved stability when recording is finished and initial load is still happening – #21573

FIX – Dead link for header image would sometimes be shown – #21581

FIX – Fixed issue downloading recordings with firmware v10.3+ – #21584

Latest ATEM suite / firmware tested : 10.2.1. / 9.5.1

Changes since 2.14.0.32

FIX – FTP downloads erroneously syncing $RECYCLE.BIN instead of recordings – #21413

FIX – Opening the web interface can put the mute graphic to air – #21552

Latest ATEM suite / firmware tested : 10.2.1. / 9.5.1

Changes since 2.14.0.29

NEW – Support for RØDECaster v1.7 firmware (ASIO names have changed) – #20784

NEW – Added .tar option alongside .zip for ISO retrieval – #20868

FIX – Improved support for Safari browser – #20842

FIX – Added handling of ATEM occasionally splitting ISO files – #20867

FIX – Maximum recording length not being honoured – #20943

Changes since 2.14.0.26

FIX – Camera One logo not visible in dark mode when running in standard mode – #20783

FIX – Zip files over 4GB not compatible with mac OS – #20811

FIX – Preview now available on the standard port to help avoid firewall issues – #20821

Changes since 2.14.0.25

NEW – Main recording is now available prior to uploading ISO files – #20416

NEW – ISO files are now deleted for unused inputs – #20417

NEW – It is now possible to delete a brand – #20490

NEW – PTZ button design improvements for dark mode – #20528 #20529

NEW – Warning is now displayed if it’s not possible to re-encode pre/post roll to the required format – #20547

FIX – Backups are appearing three times – #20491

FIX – Recording download fails without warning if using ATEM Extreme ISO and no ATEM IP address is set – #20519

FIX – Pre/post rolls are now correctly applied in the editor based on the recording’s brand – #20531

Changes since 2.14.0.11

NEW – Dark mode – Enable in Configure / Appearance – Now the default for new installs

NEW – An alternative port can now be set for an LWRP audio source – use [IP:port] – #20345

NEW – Daily & adhoc config backup – #20349

NEW – Improved reconnection message – #20467

NEW – Internal testing – Ranorex tag for the recording delete button – #20254

NEW – Internal testing – Option to disable CameraOne Plus features – #20396

FIX – Various changes to decrease service shutdown time

FIX – AutoMute toggle has no effect – #20273

FIX – Mute button requires 2 clicks after restart – #20228

FIX – Enabling AutoMute should change mute status if necessary – #20286

FIX – Mute status not correctly shown on startup – #20288

FIX – DSK pre multiplied key option missing from Graphics configuration – #20329

FIX – ISO zip files not appearing in CameraOne Plus mode – #20392

FIX – Mute and bug graphics not working in CameraOnePlus Mode – #20439

FIX – Mute doesn’t work if no bug is configured – #20456

FIX – Web interface no loading in Firefox and Safari – #20461

FIX – Remove unused language resources when publishing – #20464

FIX – ISO Recording “Exclude WAV files” option not working – #20477

Changes since 2.13.1.4

NEW – Introducing CameraOne plus (license required). Includes ATEM Constellation support, branding and PTZ control

NEW – Support for .NET10 – #20185 #20184

NEW – A label can now be added to identify the studio

FIX – Application could crash if the recording folder is invalid – #20192