CameraOne Release Notes – Gecko ( 2.12.x.x )

Changes since 2.12.0.97

FIX – Parsing of recording duration fails if region uses comma as the decimal separator

Changes since 2.12.0.95

FIX – Improved detection of a MIDI interface disconnect

FIX – Zipping of ISO files is now retried following an error

FIX – Retry loop added for IsDiskAvailable check to work around a BlackMagic bug when determining recording method

FIX – Fixed null reference exception if FTP GetListing returns zero results.

Changes since 2.12.0.94

FIX – Main recordings not downloading via FTP when ISO disabled

Changes since 2.12.0.93

FIX – Attempting to upload a graphic with an incorrect resolution gives the impression that the upload was successful

Changes since 2.12.0.91

FIX – Not possible to select MIDI trigger

FIX – Upload of media file which exceeds max file does not show error and fails silently

Changes since 2.12.0.84

NEW – A warning message is now displayed if an audio interface disconnects

FIX – Enable / disable ISO recording setting missing despite ISO recording being available

FIX – When using ATEM USB disc recording, it was possible for the current recording to be erroneously deleted when downloading the previous one

FIX – Downloading recordings when using ATEM USB disc no longer stop following a config change

FIX – 1st OnAir trigger after a restart is no longer ignored

FIX – RØDECaster connection check during initial setup no longer erroneously fails

Changes since 2.12.0.77

NEW – It is now possible to disable live preview when using USB disc recording on an ATEM Extreme / Extreme ISO. This should not be required in most circumstances.

NEW – Support for GPU encoding when streaming directly from CameraOne

NEW – Improvements to options regarding USB / ATEM recording in order to make configuration more intuitive

FIX – ATEM reconnection now correctly restores the UI view

FIX – UI stuck on switcher status page caused by SDK hang when requesting ISO available features on ATEM Extreme

FIX – Clean shutdown of media foundation when ATEM is disconnected and recording is in progress

FIX – Only disconnect services that need to be disconnected if ATEM streamer disconnects unexpectedly

FIX – Connect page refactored to not require a full teardown when testing if an IP connection is available

FIX – Switcher connection failing following initial entry of IP address

FIX – Graphic file delete throws exception

FIX – Improvements to RØDECaster reconnection

FIX – Default streaming parameters were causing connection problems when streaming directly from CameraOne

FIX – RTSP server now runs at the same bitrate as the ATEM resulting in a reduced CPU load when streaming directly from CameraOne

Changes since 2.12.0.69

NEW – Support for .NET8

NEW – Support for both preview and ISO recording when using ATEM Mini Extreme ISO

NEW – Editor support for pre and post roll video

NEW – Option to not have a default camera

NEW – Hidden setting to inhibit download from ATEM

NEW – Option to exclude WAV files (except Mic1) from ISO zip

NEW – Visual indication when archiving is in progress post ISO download

NEW – ATEM recordings started when CameraOne was not running are now moved into an unmanaged folder and the user is warned

NEW – Main program recording is no longer included in the ISO zip

FIX – New recording filename now sent to the ATEM immediately following a recording end

FIX – Improved recovery if ISO zip process is interrupted by stopping the service

FIX – Corrupted bbcommon.media.dll file version number

FIX – Recording started using ATEM software will now stop from CameraOne UI

FIX – FTP download now includes PNG files

FIX – Folders are now correctly deleted during FTP transfer

FIX – Editor shows post roll in wrong position

FIX – Improved capability detection of each ATEM model (streaming, disc recording)

FIX – Mute & bug graphics are now uploaded on startup

FIX – Waveform track sometimes doesn’t appear in editor

FIX – Home page now displayed following license activation / deactivation

FIX – Improved handling of two different GPIO sources triggering simultaneously

Changes since 2.12.0.68

FIX – Improved stability during startup

Changes since 2.12.0.66

FIX – Problems with ASIO connection

FIX – If Auto Switch is set at startup. audio manager fails to start

Changes since 2.12.0.63

FEATURE – Support for ATEM software v9.5 (it is recommended to update to this version)

FEATURE – Improved stability when streaming, particularly to Facebook Live

FEATURE – Live streaming information now shown in footer when streaming from ATEM

Changes since 2.12.0.62

FIX – Visual layout of cameras now takes cameras marked as Manual Switch into account

Changes since 2.12.0.61

FIX – Occasional issues deleting recordings

FIX – LWCP (Axia QOR) audio sources do not reconnect if they are moved around on the desk

Changes since 2.12.0.60

FIX – New recordings are not displayed if a previous corrupted recording causes the library load to fail on startup

Changes since 2.12.0.59

FIX – Record trigger from RØDECaster Pro 2 not working when set to “When RØDECaster is recording”

Changes since 2.12.0.56

NEW – AutoRecord enable / disable trigger now available

FIX – Streaming capability incorrectly picked up for ATEM Mini Extreme

FIX – Recording max length warning pops up at wrong time and doesn’t clear when recording ends

Changes since 2.12.0.55

FIX – Problems connecting to the ATEM Mini Extreme ISO

Changes since 2.12.0.46

NEW – Triggers can now be configured to switch cameras

NEW – A switcher input can now be assigned as the mute source

NEW – Mute graphic can now be set as disabled

NEW – Triggers tab now includes live indicators

NEW – It is now possible to limit the number of CPU cores utilised for clip creation

NEW – A recording duration limit can now be set

NEW – Improved workflow when deleting an audio interface

NEW – Audio input selection enhanced with new audio level picker

NEW – Date picker now offers more than the previous week if recording purge is set appropriately

NEW – Audio config tab improved by displaying audio interfaces by type

NEW – Live preview now has rounded corners

NEW – Improve indication when recordings are being processed

NEW – Streaming fields now have a clear button

NEW – ATEM streaming option is now hidden when using the base model ATEM Mini

NEW – ISO recording option is now hidden if the ATEM Mini is connected over USB

NEW – There is now a manual switch option for switcher inputs (making it visible despite no mic being assigned)

NEW – Improve labelling of switcher triggers

FIX – Sticky header and footer fixes

FIX – Improved handling of disc being full

FIX – ADAM 6066 interface reconnection improvements

FIX – Timeout now handled properly when adding ADAM 6066

FIX – Clicking the mic icon next to an audio interface now selects that interface in the pop up

FIX – Clicking the mic icon on an audio device doesn’t now show a threshold

FIX – Inputs tab elements now have consistent horizonal alignment

FIX – Missing Ember+ DLLs are now included

FIX – Config file not being updated to reflect mute and bug graphics

FIX – It’s no longer possible to add an LWRP source with an invalid IP address

FIX – Layout problem if no mute graphic is set

FIX – Trigger level for Wheatstone input incorrectly saved

FIX – Updating switcher input name doesn’t always refresh UI

FIX – Obsolete -frames ffmpeg option no longer used

FIX – Recording unable to start with ATEM Mini Pro (non ISO) model

FIX – Microphone triggers now ordered the sane as camera inputs

Changes since 2.12.0.38

NEW – It is now possible to add multiple instances of the same interface type

FIX – Invalid pixel formats are now converted to 32bit when uploading mute and bug graphics

FIX – RodeCasterMIDI faders were erroneously receiving AxiaGPIO events

FIX – Axia and Wheatstone GPI pins were being incorrectly displayed

FIX – SLIO event numbers were being incorrectly displayed

FIX – Video and audio capture device names overrides were being ignored

FIX – Audio interfaces with the same channel names were causing issues

FIX – Audio and GPIO interfaces of the same types must have unique IPAddresses

FIX – RodeCaster ASIO driver check improved by using registry keys

FIX – Wheatstone audio failing to start on startup

FIX – Wheatstone setting incorrect trigger values

FIX – Wheatstone SLIO query fails to respond when Wheatstone audio level connection is being set up

Changes since 2.12.0.32

NEW – Support for RØDECaster Duo

FIX – FTP download does not recover if disk is removed.

FIX – RØDECaster camera switches are not disabled when AutoSwitch is active

FIX – Triggering stream start from a RØDECaster pad is causing hanging if no stream is set up

FIX – Recording not working on ATEM Mini Pro when connected via IP

FIX – RØDECaster ASIO driver not identified once it’s been installed from link

FIX – Rogue PNG files preventing FTP folder delete

FIX – Connection error when connecting to ATEM Mini over IP when config already exists

FIX – Recordings stopping when a RØDECaster fader is closed despite others still being open

Changes since 2.12.0.20

NEW – RØDECaster support

NEW – MIDI GPI support

NEW – Ember+ GPIO support

NEW – Improved UI for selecting audio trigger level

NEW – User feedback that videos are being converted from v1 to v2

FIX – Audio trigger levels defaulting to 0dB

FIX – Day picker dates now update at midnight

FIX – Product update resulted in multiple versions being listed by Windows

FIX – Mute and bug graphics are lost during v1 to v2 migration

FIX – No UI update when deleting a Wheatstone GPIO source

FIX – Video Editor is leaving project files behind.

FIX – WDM source issues

Introducing Camera One v2!

NEW – Refreshed UI. A crisper look, more responsive and more accessible

NEW – Live preview (USB connection only)

NEW – Integrated video editor allows clip creation

NEW – Support for ATEM software v9 (updated required if running an older version)