Changes since 1.0.0.88
*** REQUIRES VERSION 4.3.0.22 of PhoneBox 4 (Client) ***
*** REQUIRES VERSION 3.3.0.851 of PhoneBox 3 (Server) ***
Raise .NET Requirement to 4.5.2
NEW – Virtual Director will stream to a valid RTMP server endpoint configured in the web manager.
(YouTube, Facebook live & Periscope tested)
NEW – RTSP Playback mechanism replaced with straight http video playback via web manager.
Web manager :-
NEW – Camera scoring and audio levels displayed in Web Manager.
FIX – Remove service start/stop button and replace with on/off line indicator.
FIX – VD web manager incorrectly sets GPIO event type as on-air regardless of what is selected.
FIX – Default switcher input when adding camera in Web Manager should not be 0. This has now been changed to buttons reflecting switcher inputs available.
FIX – Default API port is 9090 instead of 22215.
FIX – VD web manager HostName fields in API and Switcher tabs labelled IP Address.
FIX – Label “Channel” in mic config replaced with “Port Number” when LWRP is selected and “Source Name” when LWCP.
FIX – Now handles instance names with spaces.
FIX – XAML files are written to XAML folder when relevant fetaures are enabled in web manager.
Virtual Director Service :-
NEW – Virtual Director calls OASIS api to clear publish queue items.
NEW – Added configurable overrun to recordings. Recordings will continue for 5 seconds after off air indicator received.
NEW – Enable/Disable Mic GPIO event added.
NEW – Separate Paths for Video Recording, Playback, Posted and Archive.
FIX – XAML Graphics are now all rendered at 1080×1920 and resized at point of upload for lower res confiurations.
FIX – Purging of old videos is now done at the end of a recording on a separate thread.
FIX – Each camera switch would send the tally off command to all cameras. This is now only sent to the camera that has lost the focus where appropriate.
FIX – Camera scores are reset when off air is triggers. (Fixes occasional non switching when going on air)
FIX – Correct naming of Panasonic HE2 model cameras in config.
FIX – Media player routing established on startup.
FIX – Camera preview images retained when service restarted.
FIX – Added blank.xaml to be shown when no other graphic is available.
FIX – LWRP messages throttled to await response.
FIX – LWRP issues surrounding re-connection loops.
FIX – LWRP keep alive and watchdog pings sent every 60 seconds.
FIX – Zero based index for PTZ commands to Panasonic cameras.
FIX – Attempt to recover video stream if BlackMagic Express takes stream away from Virtual Director.
FIX – Improved upload speed of graphics to ATEM switcher.
Client :-
FIX – Selecting a camera no longer disables autoswitching. To enable manual switching you must explicitly disable AutoSwitch.
FIX – Possible to adjust camera PTZ whilst on air.
Disable Auto Switch
Select temporary shot (eg Wide)
Click relevant camera toolbox icon and adjust PTZ
Re-enable Auto Switch.